Combine Lines

Use the Combine Lines tool to create a new continuous line segment between two existing lines, resulting in a single seamless line.

Figure 1.
  1. From the Geometry ribbon, click the arrow next to the Create tool set, then select Combine Lines.

    Figure 2.
  2. Select Combine from the guide bar drop-down.
  3. Select lines to combine.
  4. Optional: Check the Smooth Connect checkbox to create curved connections between non-collinear lines, as shown in the following image.

    Figure 3.
    If left unselected, a straight line connection with angles is created.

    Figure 4.
  5. On the guide bar, click one of the following:
    • - Save changes and stay in the tool
    • - Save changes and close the tool
    • - Exit the tool without saving changes