Create Sequence

Create a sequence with load cases for the fatigue analysis.

1. In the Project Tree, open the Fatigue SN/EN Time Workbench.
2. On the workbench toolbar, click (Create sequence).
3. Create a sequence.
   1. Click Add row.
   2. Pick the structural loadcase or multi-loadcase from the drop-down list.
   3. Optional: Assign load scale.
   4. Optional: Apply Sequence repeats.
   5. Optional: To start the sequence from 0, select the Start from zero load check box.
4. Click OK.
   The sequence will appear in the Project Tree.