Multibody Joints

MADYMO

Card Description
JOINT.BRAC Card image = BRAC
JOINT.CYLI Card image = CYLI

D1 and R1 can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT.

JOINT.FREE Card image = FREE

D1 through D3, R1 through R3 and ORIENT can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT. When importing a model containing non-zero values for Q1 through Q7, these values are translated into the values for displacement and rotation; since no values for Q1 through Q7 can be set, no values will be exported.

JOINT.FREE_BRYANT Card image = FREE

D1 through D3, R1 through R3 and ORIENT can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT. When importing a model containing non-zero values for Q1 through Q7, these values are translated into the values for displacement and rotation; since no values for Q1 through Q7 can be set, no values will be exported.

JOINT.FREE_EULER Card image = FREE

D1 through D3, R1 through R3 and ORIENT can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT. When importing a model containing non-zero values for Q1 through Q7, these values are translated into the values for displacement and rotation; since no values for Q1 through Q7 can be set, no values will be exported.

JOINT.FREE_ROT_DISP Card image = FREE_BRYANT

D1 through D3, R1 through R3 and ORIENT can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT. Any JOINT.FREE_ROT_DISP is translated into a JOINT.FREE during import of the model. When importing a model containing non-zero values for Q1 through Q7, these values are translated into the values for displacement and rotation; since no values for Q1 through Q7 can be set, no values will be exported.

JOINT.PLAN Card image = PLAN

R1, D2 and D3 can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT.

JOINT.REVO Card image = REVO

R1 can not be changed, because it is defined by the position and orientation of the systems connected by the JOINT.

JOINT.REVO_TRAN Card image = REVO_TRAN

D1 and R2 can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT.

JOINT.SPHE Card image = SPHE

R1 through R3 and ORIENT can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT. When importing a model containing non-zero values for Q1 through Q4, these values are translated into the values for rotation; since no values for Q1 through Q4 can be set, no values will be exported.

JOINT.SPHE_BRYANT Card image = SPHE_BRYANT

R1 through R3 can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT.

JOINT.SPHE_EULER Card image = SPHE_EULER

R1 through R3 can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT.

JOINT.TRAN Card image = TRAN

D1 can not be changed, because it is defined by the position and orientation of the systems connected by the JOINT.

JOINT.TRAN_REVO Card image = TRAN_REVO

D1 and R2 can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT.

JOINT.TRAN_UNIV Card image = TRAN_UNIV

D1, R2 and R3 can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT.

JOINT.UNIV Card image = UNIV

R1 and R2 can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT.

JOINT.UNIV_TRAN Card image = UNIV_TRAN

D1, R2 and R3 can not be changed, because they are defined by the position and orientation of the systems connected by the JOINT.

JOINT.USER Card image = USER