Change Model Color Settings

Change how geometry and mesh entities are visualized in the modeling window by selecting a color mode.

From the View Controls toolbar, click and select a color mode.
Automatic
Switches to the appropriate color mode depending on the active tool.
Boundaries
Color by boundaries conditions via the Boundaries legend.
BL Controls
Color by boundary layer mesh controls via the BL Controls legend.
CFD Topology
Color solid bodies by part and make transparent. Color surfaces bodies in gray, free and shared edges in red, non-manifold edges in yellow.
Component
Color elements, surfaces, and solid faces based on the component to which they belong.
Edge Controls
Color by edge mesh controls via the Edge Controls Legend.
Mappable
Display surfaces in wireframe, and color surface edges blue (ignoring topology). Color solid faces by mappability: red (not mappable), yellow (1D mappable), or green (3D mappable). Color solid face edges by topology.
Mixed
Color surfaces and solid faces based on the component to which they belong, and color surface edges and solid face edges by topology.
Part
Color all surfaces based on the part to which they belong.
Surface Element Quality
Color elements based on their quality, which is defined by the 2D element criteria settings. The element quality legend displays in the modeling window to assist you in evaluating the element quality.
Surface Groups
Color by surface groups via the Surface Groups legend.
Surface Controls
Color by surface mesh controls via the Surface Controls legend.
Topology
Color 2D faces gray, and color surface edges by topology: red (free edges), green (shared edges), yellow (t-junctions), and blue (suppressed edges). Color solid faces and face edges transparent green (bounding faces), and color internal faces yellow (full partition faces).