CylindricalRequestPoints
The cylindrical request point positions.
Example
app = cf.GetApplication() project = app:NewProject() -- Add a Cylindrical NearFiled starting at (0,0,0) extending up to a height of 1, -- an inner radius of 1 and an outer radius of 2. nearField = project.SolutionConfigurations[1].NearFields:AddCylindrical(1,0,0, 2,360,1, 3,21,11) cylindricalRequestPoints = nearField.CylindricalRequestPoints -- Get the Phi coordinate of the start of the NearField, which is 0 degrees startPhi = cylindricalRequestPoints.Start.Phi -- Get the Phi coordinate of the end of the NearField, which is 360 degrees endPhi = cylindricalRequestPoints.End.Phi
Usage locations (object properties)
The following objects have properties using the CylindricalRequestPoints object:
Property List
- End
- The end point. (Read only CylindricalPoint)
- Increment
- The increment per axis. Only valid if PointSpecificationMethod is Increment. (Read only CylindricalPoint)
- NumberOfPoints
- The number of points per axis. Only valid if PointSpecificationMethod is NumberOfPoints. (Read only CylindricalPoint)
- Start
- The start point. (Read only CylindricalPoint)
Property Details
- End
- The end point.
- Type
- CylindricalPoint
- Access
- Read only
- Increment
- The increment per axis. Only valid if PointSpecificationMethod is Increment.
- Type
- CylindricalPoint
- Access
- Read only
- NumberOfPoints
- The number of points per axis. Only valid if PointSpecificationMethod is NumberOfPoints.
- Type
- CylindricalPoint
- Access
- Read only
- Start
- The start point.
- Type
- CylindricalPoint
- Access
- Read only