Connect circuit elements to the cable connector pins in the cable schematic
view.
-
On the Schematic
contextual tabs set, on the Cable schematic tab, in
the Mode group, click the Wire mode icon.
A “ + ” at the cursor position indicates that the wire mode is
enabled.
-
Click and drag to create a wire connection.
-
Release the mouse button at the position where the end of the wire connection
is required.
Note: Cable connectors and circuit elements have connection points indicated by
a dot.
- A white dot indicates no connection between pins and/or circuit
elements.
- A black dot indicates a connection between pins and/or circuit
elements.
|
|