BusSignalScoping

This block defines the Scope of the bus signal, which is defined by the SetBusSignal block with the corresponding signal name, when the SetBusSignal block is configured as "Scoped".

    BusSignalScoping

Library

BusOperations

Description

The BusSignalScoping block defines the accessibility of the SetBusSignal block when it is configured as "Scoped". The GetBusSignal block corresponding to the SetBusSignal must be in the same subsystem of the BusSignalScoping or in the subsystems below it in the model hierarchy.
It's not needed for Local or Global scoping bus signals.
The signal name can be any valid OML string.

Parameters

BusSignalScoping_0

NameLabelDescriptionData TypeValid Values

tag

Bus signal name

Specify the name of the bus signal.

String