Network Prediction

Perform network prediction based on wave propagation results.

Network predictions require wave propagation prediction results on horizontal prediction planes for more than one transceiver.
Note: Network predictions can be done only after wave propagation prediction has been computed for all nodes of the network.
A network prediction can be started by selecting Computation > Compute All > Network from the Computation menu or by clicking the corresponding button of the Project toolbar.

Network predictions can be done for horizontal prediction planes only. The area to be predicted, the resolution of the results as well as the height(s) of the prediction planes depend on the corresponding parameters of the wave propagation results which are considered for the computation. The results which have been selected to be computed and stored to disk can be displayed in the 2D view and 3D view using the File Browser. Network results which have been computed will be saved in the sub folder network within the specified result folder.



Figure 1. Example of network prediction results.