WinProp_Trajectory

Data Fields

Detailed Description

Structure for receiver configuration if trajectory mode is on.

Field Documentation

Id

int WinProp_Trajectory::Id

The ID of the trajectory

Enabled

int WinProp_Trajectory::Enabled

The status of the trajectory (enabled/disabled)

• 0 = disabled
• 1 = enabled

Name

const char * WinProp_Trajectory::Name

The name of the trajectory

NrPoints

int WinProp_Trajectory::NrPoints

The number of points

Points

WinProp_Trajectory_Point * WinProp_Trajectory::Points

The points defining the trajectory. The first element will be the start of the trajectory, while the last element defines the end. Array of length NrPoints

samplingMode

int WinProp_Trajectory::samplingMode

The sampling mode.

• 0 = Sample the distance between evaluation points.
• 1 = Sample the time between evaluation points.

samplingResolution

double WinProp_Trajectory::samplingResolution

The sampling resolution. Based on samplingMode either in seconds or in meter.

addPointsToSamples

int WinProp_Trajectory::addPointsToSamples

Defines if the in Points defined locations are part of the trajectory samples.

• 1 = the in Points defined locations will be part of the trajectory samples and effectively only between those points the sampling will be done
• 0 = the in Points defined locations will not necessarily be part of the samples

HeightAbsolute

int WinProp_Trajectory::HeightAbsolute

Height definition of receiving antenna.

• 0 = Height relative to ground
• 1 = Height absolute to sea level
• 2 = Height relative to floors (only in case of indoor scenarios)

PointSize

double WinProp_Trajectory::PointSize

Size of the predicted points, needs to be identical for all trajectories provided to WinProp_Predict_Trajectories.