Defines and constants

Detailed Description

Defines and constants

Error codes and Parameters associated with a .mif database.
MAPINFO_FILENAME_ADD "_area"
Suffix.
MAPINFO_ERROR_FILENOTFOUND 1
Error code for: .mif file not found.
MAPINFO_ERROR_NRPOLYGONS 2
Error code for: incorrect number of polygons in .mif file.
MAPINFO_ERROR_POLYGONNOTVALID 3
Error code for: invalid polygon in .mif file.
MAPINFO_ERROR_FEATURE 4
Error code for: incorrect element type in .mif file.
MAPINFO_ERROR_PARAMETERWRONG 5
Error code for: unknown format in .mif file.
Selection of type of database.
WINPROP_ERROR_DATABASE 6
Error code for: error while reading database.
WINPROP_ERROR_LICENSE 7
Error code for: license error.
WINPROP_ERROR_WRONGPARAMETER 8
Error code for: wrong parameter specified.
DATABASE_TYPE_MAPINFO 0
The database is a .mif file. This is used in the DatabaseFileType parameter of the OutdoorPlugIn_ReadPredictionArea function.
DATABASE_TYPE_WINPROP_ODB 1
The database is a .odb file. This is used in the DatabaseFileType parameter of the OutdoorPlugIn_ReadPredictionArea function.
DATABASE_TYPE_WINPROP_OPB 2
The database is a .opb file. This is used in the DatabaseFileType parameter of the OutdoorPlugIn_ReadPredictionArea function.
DATABASE_TYPE_WINPROP_OCB 3
The database is a .ocb file. This is used in the DatabaseFileType parameter of the OutdoorPlugIn_ReadPredictionArea function.
DATABASE_TYPE_WINPROP_OIB 4
The database is a .oib file. This is used in the DatabaseFileType parameter of the OutdoorPlugIn_ReadPredictionArea function.
Selection of urban prediction model.
PREDMODEL_COST 0
COST 231 Walfisch-Ikegami model used in an urban scenario. See WinProp_ParaMain::PredictionModelUrban where this is used.
PREDMODEL_UDP 1
Urban dominant path model. See WinProp_ParaMain::PredictionModelUrban where this is used.
PREDMODEL_IRT 2
3D intelligent ray tracing model. See WinProp_ParaMain::PredictionModelUrban where this is used.
PREDMODEL_KE 3
Knife edge model. See WinProp_ParaMain::PredictionModelUrban where this is used.
PREDMODEL_ITU1411 4
ITU-R P.1411 model used in an urban scenario. See WinProp_ParaMain::PredictionModelUrban where this is used.
Selection of rural prediction model.
PREDMODEL_RURAL_NONE 0
No rural prediction required (only necessary in case of multi scenario predictions). See WinProp_ParaMain::PredictionModelRural where this is used.
PREDMODEL_RURAL_HATA 1
Okumura-Hata model. See WinProp_ParaMain::PredictionModelRural where this is used.
PREDMODEL_RURAL_2RAY_EMP 2
Empirical two ray model. See WinProp_ParaMain::PredictionModelRural where this is used.
PREDMODEL_RURAL_2RAY_DET 3
Deterministic two ray model. See WinProp_ParaMain::PredictionModelRural where this is used.
PREDMODEL_RURAL_RDP 4
Rural dominant path model. See WinProp_ParaMain::PredictionModelRural where this is used.
PREDMODEL_RURAL_PE 5
Rural parabolic equation model. See WinProp_ParaMain::PredictionModelRural where this is used.
Modes for antenna patterns.
PATTERN_MODE_2X2D 0
Total pattern given by 2 2-D patterns (vertical and horizontal polarisations). See WinProp_Pattern::Mode.
PATTERN_MODE_3D 1
Total pattern given by a 3-D pattern. See WinProp_Pattern::Mode.
Selection of scenario.
SCENARIOMODE_RURAL 0
Rural prediction based on topography and optionally clutter data. See WinProp_ParaMain::ScenarioMode where this is used.
SCENARIOMODE_URBAN 1
Urban prediction based on topography and vector building data. See WinProp_ParaMain::ScenarioMode where this is used.
Selection of vector buildings mode.
BUILDINGSMODE_NONE 0
No buildings will be considered. See WinProp_ParaMain::BuildingsMode where this is used.
BUILDINGSMODE_RAM 1
Load buildings from RAM. See WinProp_ParaMain::BuildingsMode where this is used.
BUILDINGSMODE_UDP 2
Load .opb database. See WinProp_ParaMain::BuildingsMode where this is used.
BUILDINGSMODE_IRT 3
Load .oib database. See WinProp_ParaMain::BuildingsMode where this is used.
BUILDINGSMODE_COST 4
Load .ocb database. See WinProp_ParaMain::BuildingsMode where this is used.
BUILDINGSMODE_BINARY 5
Load .odb database. See WinProp_ParaMain::BuildingsMode where this is used.
Indoor coverage of buildings.
COVERAGEINDOOR_NONE 0
See the description in WinProp_ParaMain::BuildingsIndoorCoverage.
COVERAGEINDOOR_CONSTANT 1
See the description in WinProp_ParaMain::BuildingsIndoorCoverage.
COVERAGEINDOOR_EXPONENTIAL 2
See the description in WinProp_ParaMain::BuildingsIndoorCoverage.
COVERAGEINDOOR_USERDEFINED 3
See the description in WinProp_ParaMain::BuildingsIndoorCoverage.
COVERAGEINDOOR_ONROOF 4
See the description in WinProp_ParaMain::BuildingsIndoorCoverage.
Topography mode.
TOPOMODE_NONE 0
No topography considered. See WinProp_ParaMain::TopographyMode where this is used.
TOPOMODE_RAM 1
Load topography from RAM. See WinProp_ParaMain::TopographyMode where this is used.
TOPOMODE_FILE 2
Load topography from the building database. See WinProp_ParaMain::TopographyMode where this is used.
TOPOMODE_SEPARATE 3
load topography from a separate file. See WinProp_ParaMain::TopographyMode where this is used.
Vegetation mode.
VEGETATION_NONE 0
No vegetation considered. See WinProp_ParaMain::VegetationMode where this is used.
VEGETATION_PIXEL 1
Load from a .veg file. See WinProp_ParaMain::VegetationMode where this is used.
VEGETATION_SEPARATE 2
Load from a separate .odb file. See WinProp_ParaMain::VegetationMode where this is used.
VEGETATION_BUILDING 3
Load from building databse. See WinProp_ParaMain::VegetationMode where this is used.
VEGETATION_CLUTTER 4
Load from clutter database. See WinProp_ParaMain::VegetationMode where this is used.
Clutter mode.
CLUTTERMODE_NONE 0
No clutter considered. See WinProp_ParaMain::ClutterMode where this is used.
CLUTTERMODE_RAM 1
Load clutter from RAM. See WinProp_ParaMain::ClutterMode where this is used.
CLUTTERMODE_FILE 2
Load clutter from a separate file. See WinProp_ParaMain::ClutterMode where this is used.
Clutter computation mode.
CLUTTERLOSS_HEIGHTS_NONE 0
No clutter heights considered. See WinProp_ParaMain::ClutterConsideration where this is used.
CLUTTERLOSS_HEIGHTS 1
Constant height for all clutter. See WinProp_ParaMain::ClutterConsideration where this is used.
CLUTTERLOSS_HEIGHTS_STATISTIC 2
Heights according to a statistical distribution. See WinProp_ParaMain::ClutterConsideration where this is used.
CLUTTERATTENUATION_NONE 0
See WinProp_ParaMain::ClutterAttenuation where this is used.
CLUTTERATTENUATION_LOCAL 1
See WinProp_ParaMain::ClutterAttenuation where this is used.
CLUTTERATTENUATION_RAY_TOTAL 2
See WinProp_ParaMain::ClutterAttenuation where this is used.
CLUTTERATTENUATION_RAY_DECREASE 3
See WinProp_ParaMain::ClutterAttenuation where this is used.
Filter results mode.
FILTERMODE_MEAN 0
Mean based result filtering. See WinProp_ParaMain::FilterMode where this is used.
FILTERMODE_MEDIAN 1
Median based result filtering. See WinProp_ParaMain::FilterMode where this is used.
Submode for IRT with pre-processed databases.
PP_MODE_IRT_3D 0
Setting for 3D IRT. See WinProp_PreProUrban::Mode where this is used.
PP_MODE_IRT_2x2D_IRT 1
Setting for 2D horizontal IRT and 2D vertical IRT. See WinProp_PreProUrban::Mode where this is used.
PP_MODE_IRT_2x2D_KE 2
Setting for 2D horizontal IRT and vertical Knife Edge model. See WinProp_PreProUrban::Mode where this is used.
Spherical zone acceleration mode for IRT.
PP_MODE_IRT_ZONE_OFF 0
No spheric zone considered. See WinProp_PreProUrban::SphericMode where this is used.
PP_MODE_IRT_ZONE_CONSTANT 1
Constant spheric zone size. See WinProp_PreProUrban::SphericMode where this is used.
PP_MODE_IRT_ZONE_ADAPTIVE 2
Adaptive spheric zone size. See WinProp_PreProUrban::SphericMode where this is used.
Knife-Edge (KE) settings
KE_OFF 0
Not considered. See WinProp_ParaRural::KnifeEdge where this is used.
KE_DEYGOUT 1
Considered according to the approach from Deygout. See WinProp_ParaRural::KnifeEdge where this is used.
KE_EPSTEIN 2
Considered according to the approach from Epstein/Peterson. See WinProp_ParaRural::KnifeEdge where this is used.
Hata sub model
HATA_SUB_CLUTTERTABLE 0
See WinProp_ParaRural::HataSubMode where this is used.
HATA_SUB_DENSEURBAN 1
See WinProp_ParaRural::HataSubMode where this is used.
HATA_SUB_MEDIUMURBAN 2
See WinProp_ParaRural::HataSubMode where this is used.
HATA_SUB_SUBURBAN 3
See WinProp_ParaRural::HataSubMode where this is used.
HATA_SUB_OPEN 4
See WinProp_ParaRural::HataSubMode where this is used.
Default values for different parameters
INTERMEDIATE_DEFAULT_VALUE_MAXPATHLOSS 1
Use intermediate value for maximum path loss.
The documentation was generated from the following file:
  • source.eng/Interface/OutdoorPlugIn.h