When the meshing process is finished, the user can start the simulation. It is
advised for the user to verify that all the simulation parameters are correct. If
there is any problem that prevents the simulation from running, it will be notified
to the user.
Figure 1. Calculate menu
Selecting the Calculate → Execute option from the menu will show the following
panel:
Figure 2. Calculate options panel
In this panel, the user needs to select the number of processors that will run the
simulation. When the user presses the Execute button, the simulation will begin. The
Process Log panel will show the status of the running simulation:
Figure 3. Process log showing the status of the simulation
It is possible to abort the simulation at any time, but only when it is running.
