AcuSolve Launch Settings
After meshing the model and setting the boundary conditions the model setup is ready for solving.
The solver can be launched by clicking
or by clicking the icon.- Problem Name
- Specifies the name of the problem. All of the files during the solutions are created based on this name.
- Problem Directory
- Specifies the directory in which the input files for the problem are present.
- Working directory
- Specifies the directory in which the solution files are written.
- Solver Modules
- Specifies the type of solvers to be run. Solver modules include Prep, View, Solve, Prep-Solve and all.
- Prep
- Performs only the pre-processing of the model using AcuPrep module.
- View
- Performs only pre-processing of radiation parameters using the AcuView module.
- Solve
- Performs only the solver module of AcuSolve.
- Prep-Solve
- Performs the pre-processing of the flow parameters and solves the problem.
- all
- Performs all the modules of pre-processing and solving modules.
- User Library list
- If the simulation uses a user-defined function (UDF) then the name of compiled file should be placed for this parameter.
- User argument list
- Specifies the list of arguments to be passed on to the User Library list.
- Number of Processors
- Specifies the number of processors for running the problem.
- Generate AcuSolve input files
- Flag specifying whether or not to generate the input files.
- Launch AcuSolve
- Flag specifying whether or not to launch the solving process.
- Run on remote host
- Flag to specify whether to run on remote host/cluster.
- From problem
- Name of the problem from which restart has to be initiated.
- From directory
- Directory in which the previous solution files are present.
- From run
- Specifies the number of the run from which restart has to be initiated. A value of zero uses the last run available.
- From time step
- Specifies the time step from which the run has to be initiated. A value of zero uses the last available time step.
- Reset time step
- Flag specifying whether the time step numbering should be followed from the previous solution.
- Reset time increment
- Flag specifying whether to use the time increment from the previous problem. Using on uses the time increment mentioned in the present run.