vovwxconnect

Utility to setup a connector for Accelerator Plus to a primary queue.


vovwxconnect: Usage Message
  
  DESCRIPTION:
      Utility to setup a connector for Accelerator Plus to a primary queue
  
  OPTIONS:
      -h               -- This help.
      -v               -- Increase verbosity.
      -nc NCQUEUENAME  -- Connect with specified Accelerator queue.
      -vovdir PATH     -- Specify VOVDIR for Accelerator queue, if different
                          than that of Accelerator Plus.
      -lsfemul NCQ     -- Connect with Accelerator but using the LSF emulation
                          interface (only for debugging)
      -pbs             -- Connect with PBS
      -pbsemul NCQ     -- Connect with Accelerator but using the PBS emulation
                          interface (only for debugging)
      -legacy          -- Connect using legacy daemons vovelasticd vovlsfd.
      -show            -- Show what is connected.
      -test            -- Validate connections by running a test job.
      -nostart         -- Do not start the vovwxd daemon.
      -loglevel L      -- Set verbosity level for vovwxd (0-6)
  
  EXAMPLES:
     % vovproject enable MY_WX_PROJECT
     % vovwxconnect -nc vnc1 vnc2
     % vovwxconnect -nc vnc1 -nc vnc2
     % vovwxconnect -nc vnc_test -vovdir /some/path/to/a/vovdir/used/by/vnc_test
     % vovwxconnect -pbs
     % vovwxconnect -show
     % vovwxconnect -test
     % vovwxconnect -lsfemul vnc_test