# TRQuantity

The transmission reflection coefficient quantity properties.

## Example

app = pf.GetApplication()
app:NewProject()
app:OpenFile(FEKO_HOME..[[/shared/Resources/Automation/Wire_Cross_tht45_eta0.fek]])
TRCoefficientData = app.Models[1].Configurations[1].TRCoefficients["TRCoefficients1"]

-- Configure the 'TRQuantity' of the transmission reflection trace

TRCoefficientTrace.Quantity.Type = pf.Enums.TRCoefficientQuantityTypeEnum.Transmission
TRCoefficientTrace.Quantity.PolarisationType = pf.Enums.PolarisationTypeEnum.CoPolarisation


## Usage locations (object properties)

The following objects have properties using the TRQuantity object:

## Property List

ComplexComponent
The complex component of the value to plot, specified by the ComplexComponentEnum, e.g. Magnitude, Phase, Real, Imaginary. (Read/Write ComplexComponentEnum)
PhaseUnwrapped
Specifies whether the phase is unwrapped before plotting. This property is only valid when the ComplexComponent is Phase. (Read/Write boolean)
PolarisationType
The polarisation type of the value to plot, specified by the PolarisationTypeEnum, e.g. Total, CoPolarisation or CrossPolarisation. (Read/Write PolarisationTypeEnum)
Type
The type of quantity to be plotted, specified by the TRCoefficientQuantityTypeEnum, e.g. Transmission or Reflection. (Read/Write TRCoefficientQuantityTypeEnum)
ValuesNormalised
Specifies whether the quantity values must be normalised to the range [0,1] before plotting. This property can be used together with dB scaling. This property is not valid when the ComplexComponent is Phase. (Read/Write boolean)
ValuesScaledToDB
Specifies whether the quantity values are scaled to dB before plotting. This property is only valid when the ComplexComponent is Magnitude. (Read/Write boolean)

## Property Details

ComplexComponent
The complex component of the value to plot, specified by the ComplexComponentEnum, e.g. Magnitude, Phase, Real, Imaginary.
Type
ComplexComponentEnum
Access
PhaseUnwrapped
Specifies whether the phase is unwrapped before plotting. This property is only valid when the ComplexComponent is Phase.
Type
boolean
Access
PolarisationType
The polarisation type of the value to plot, specified by the PolarisationTypeEnum, e.g. Total, CoPolarisation or CrossPolarisation.
Type
PolarisationTypeEnum
Access
Type
The type of quantity to be plotted, specified by the TRCoefficientQuantityTypeEnum, e.g. Transmission or Reflection.
Type
TRCoefficientQuantityTypeEnum
Access