View Near Field Diagram

After clicking on Show Results - Near Field - View Near Field Diagram, a new panel is opened on right side to select which observation points are considered in the diagram. In this panel, the following options are available:

  • Step To specify the step results files when a parametric simulation has been run.
  • Frequency To specify the desired frequency results files when a frequency sweep has been run.
  • Observation points List with all the observation points entities defined. Select the desired ones to plot the near field results.
  • Select all Click on this button to select all the observation points entities.
  • Ok Confirm the observation points to plot and open the Near Field 3D diagram.

Then, the options available in the Near Field 3D results panel are listed:



Figure 1. Near Field diagram
  • Left color legend it shows the magnitude and range of values of the represented results.
  • Incidence The near field may be plotted by considering different contributions on the observation points.
    • Scatter Scattered field components.
    • Direct Direct field components.
    • Total Combination of the scattered field plus the direct field components.
  • Magnitude The near field may be represented in natural or dBs magnitudes.
    • dBs The near field is represented in logarithmic scale, given in dB-Amperes per meter for magnetic field, or in dB-Volts per meter for electric field.
    • nat The near field is represented in natural scale, given in Amperes per meter for magnetic field, or in Volts per meter for electric field.
  • Field Component To specify the field component to plot. Only one component may be selected:
    • Ex Plot the X component of electric field.
    • Ey Plot the Y component of electric field.
    • Ez Plot the Z component of electric field.
    • ETotal Plot the total electric field, which is the combination of the X, Y and Z components.
    • Hx Plot the X component of magnetic field.
    • Hy Plot the Y component of magnetic field.
    • Hz Plot the Z component of magnetic field.
    • HTotal Plot the total magnetic field, which is the combination of the X, Y and Z components.
  • Filtering Range Use this section to skip results that are outside the desired range.
    • Enable Filtering The filter only is applied when this check box is selected.
    • Max To specify the maximum value of the range.
    • Min To specify the minimum value of the range.
    • Filter Click on this button to update the results filtering.
  • Bottom Options Below the near field diagram, the following options are included:
    • Options Disable this option to hide the left menu and visualize just the near field diagram.
    • Show Grid Enable this option to visualize the grid of the near field observation entity.
    • Show Geometry Enable this option to visualize the meshed geometry together the near field diagram.
    • Show Axis Enable this option to show the coordinate axes.
    • Save as To export the current representation as an image file.