Define Interface Radome

The "Define Interface Radome" option allows the user to generate a radome, including interfaces and materials. Every radome layer is bounded by two surrounding interfaces and the material defined on the inner interface. Click on to add a new radome.


Figure 1. Interface Radome Definition Tab

"Interface 1" is the most inner one, select its geometry and select the interface on the table, then click on Set Objects.

Repeat the process with all interfaces. Then select the layer material clicking on the material cell.


Figure 2. Set Objects on Interface 1
FSS geometry can be added to the interface. First, create the FSS geometry using arrayOnSurface command. Select its geometry and select the interface on the table, then click on Set FSS Elements.


Figure 3. Set FSS Elements on interface 2

The "Antenna Results" checkbox enables meshing and calculating the antenna system without the radome structure. This option enables "Insertion Losses" and "Boresight Error" and allows to compare the results when the radome is considered or not.

Click on "Save" button to save the radome parameters.