Creating the Mesh

Create a mesh suitable for the geometry and wavelength.

1. Open the Create mesh dialog using one of the following workflows:
   • On the Mesh tab, in the Meshing group, click the  Create mesh icon.
   • Press Ctrl+M to use the keyboard shortcut.
2. Set the Mesh size to Coarse.
3. Set the Wire segment radius to 0.001.

   
   

   

   
   

Save the model.

4. Click the application menu. From the drop-down list click Save as.

   
   

   

   
   

5. Enter the model name as Dipole_Optimisation and click Save.
   Note: The CADFEKO message window will indicate that six files have been saved.