Command Shell Output

Allocations made by Allocator and other details related to the allocation can be viewed on the command line of a shell where the Allocator project has been enabled.

Note: This is a very raw output. To get a more useful view and functionality, it is recommended to use the browser interface, described in an earlier section.

In a shell, use the following command:

vovshow -la

This will display the allocation details in a tabular format, as shown below. For each resource, this output will give a total summary across all sites, as well as details of individual sites identified by their nickname. For each site, it shows 3 values as r/a/q: running/allocated/queued.

% vovshow -la
LMSITE 000097801 licmon
NCSITE 000103532 SC
NCSITE 000106903 IN
NCSITE 000110274 CN
RESOURCE_NAME                        TOTAL UNALLOC INFLIGHT SC   r/a/q   IN   r/a/q   CN   r/a/q
License:111                              7       0       0   0/  6/  0    0/  1/  0    0/  0/  0
License:940                              1       0       0   0/  1/  0    0/  0/  0    0/  0/  0
License:945                              1       0       0   0/  1/  0    0/  0/  0    0/  0/  0
License:AAA                             62       0       0   0/ 52/  0    0/ 10/  0    0/  0/  0
License:AEMv8_RAVEN                    400       0       0   0/334/  0    0/ 66/  0    0/  0/  0
License:AdvancedAMSDebug                 3       0       0   0/  3/  0    0/  0/  0    0/  0/  0
License:Affirma_AMS_distrib_p           60       0       0   0/ 50/  0    0/ 10/  0    0/  0/  0
License:Affirma_sim_analysis_env         5       0       0   0/  5/  0    0/  0/  0    0/  0/  0
...
...

You can choose to see only a specific column for each site by specifying the name of that column on the vovshow command line. The available columns are inuse, alloc, queued, or all. If no column is specified, it defaults to showing all columns.

vovshow -la alloc

You can see details of only a specific resource as shown below:

vovshow -lares License:workflowsim