Browser-based Setup

Once the Accelerator vovserver has been started, you can view and manage it using your web browser.

The Setup Page

The URL for the Accelerator vovserver can be found with the following command:
% nc cmd vovbrowser
The setup page is available at the URL /cgi/setup.cgi.
% nc cmd vovbrowser -url /cgi/setup.cgi

Web Interface Screens

The Introduction page provide an overview of the available information. As indicated in the left column, menus and guidelines are available for setting up and using the Accelerator features. More detailed information and advanced methods are provided in this document in other chapters.

Figure 1.